Step 2: Select Voltage Tap (Models 4.2T And 6.2T Only); Step 3: Mount The Speaker To The Sam™ Bracket - Electro-Voice EViD 3.2 Owner's Manual

Product Description
Step 2: Select Voltage Tap (Models
4.2t and 6.2t Only)
Before mounting the speaker to the brack-
et, select the proper voltage tap setting for
your installation. The voltage selector
switch is located at the rear of the speaker
below the input terminal panel.
The EVID™ 4.2t and 6.2t include a switch
for selecting the power taps. The EVID™
3.2t has a single power tap.
EVID™ 3.2t
A single (non-selectable) power tap rated at
5W@70V and 10W@100V.
EVID™ 4.2t
The power taps are 30W, 15W and 7.5W at
both 70.7V and 100V, with a 3.7W tap for
70.7V only.
EVID™ 6.2t:
The power taps are 60W, 30W and 15W at
both 70.7V and 100V, with a 7.5W tap for
70.7V only.
The taps for the models listed above are
selected by a rotary switch on the back
panel. A guide on the back of each speaker
shows which switch positions to use for the
power settings at 70V and 100V.
Figure 8 below illustrates the settings for
the 4.2t and 6.2t
Voltage tap
selector
Figure 8: Voltage tap (4.2 and 6.2)
EVID Owner's Manual
Step 3: Mount the Speaker to the
SAM™ Bracket
Attach the speaker to the SAM™ bracket
with the socket head bolt, as shown in
Figure 9.
Figure 9: Attach SAM™
Secure the speaker with the provided
security tool by tightening the two socket
head bolts as shown. After selecting the
proper horizontal angle, secure the swing
axis as shown by tightening bolt A. Next,
select the proper vertical angle with the
aid of the angle markers as shown in
Figure 10. Then secure the rotation axis by
tightening bolt B.
Figure 10: Tighten socket-head bolts
Bolt A
(swing)
Bolt B
(rotation)
15˚ angle markers
5