General Specifi Cations - Oneida Air Systems Dust Cobra - XCK010000 Owner's Manual

II. General Specifi cations
Certifi ed Full Unit
HEPA Vacuum -
Meets EPA RRP
Requirements
Including Lead.
- Certifi cate included
with every unit.
Patent Pending
Appearance May Vary.
Finally, a dust collection solution
for portable, table top, and hand
power tools with small dust ports.
The Dust Cobra® works for applications where
dust collectors or shop vacuums don't.
High Suction. 3X the air performance of most shop vacuums
- 90"W/C - 260 CFM (Std shop vacuums 70 CFM)
Ultra-High Efficiency Cyclonic Separation - 99% before
the filter - Eliminates filter clogging.
Standard size HEPA filter
Less than 50 Lbs.
No Filter Bags.
Runs on 110V.
73 dBA @ 10'.
XCK010000
XCK010099
Performance
Dimensions
Filter Media
*Oneida reserves the right to change or modify specs and system appearance without
notice. Actual system appearance may vary.
Contractors - Keep the Job Site Clean!
Included Wall Bracket
SMS001200A
Part #
Dust Cobra® - Standard Motor
Dust Cobra® - Brushless Industrial Motor
90" W/C Max. Suction - 260 CFM Max. Air Flow
System
Vacuum Motor Voltage: 110V / 11 Amps
Developes 3 psi. 7x more than a dust collector.
73 dBA @ 10'
Height w/ 10 Gallon Drum: Under 62""
System Footprint: Approx. 24" x 24
Inlet Diameter: Full Welded 2.5" w/ Neutral Vane
Powder Coated Paint Finish Over Heavy Gauge Steel
HEPA Filter Media Captures 99.97% of Test Material
from 0.3 Microns No Other Filter Bags Required.
Wall Bracket - SMS001200A
Included
Filter Pulse Cleaning Bar
Nylon Hose Strap - RHS000000
Unit Weight: Under 50 lbs.
Weight
Shipping Weight: (1) 30" x 19" x 15" Cyclone Box - 16 lbs.
Cart - STZ0000012 - Use w/ included Wall Bracket
12.5' of 2.5" hose - AXD500000
Options
25' of 2.5" hose - VSHRFB250
Drums - 10 gal.,17 gal. & 30 gal.
10 gal. & 17 gal. Plastic Bag Drum Liner Hold-Down
Designed for Portable Woodworking Tools - Ideal for por-
table tools with small dust ports. High Pressure Applica-
tions (where standard dust collectors don't work) - Panel
Saws, Routers, Dremel Tools, Carving Tools, Scroll Saws,
Band saws, Lathes, Chop and Miter saws.
Dust Cobra Owner's Manual
Description
(1) 24" x 25" x 47" Stand Box - 84 lbs.
Appearance May Vary.
Shown with optional cart
and hose.
O.A.S. 2010
c
3