Seat Height Adjustment; Front Storage Area - Pride Mobility Go-Go Elite Traveller Owner's Manual

V I I .

SEAT HEIGHT ADJUSTMENT

The seat can be repositioned to different heights. See
figure 19.
1. Remove the seat and battery pack from your
Travel Scooter.
2. Use the attached ring to pull and remove the detent
pin from the lower seat post.
3. Raise or lower the upper seat post to the desired
seat height.
4. While holding the upper seat post at that height,
align the adjustment holes of the upper and lower
seat posts.
5. Fully insert the detent pin.
6. Replace the battery pack and seat.

FRONT STORAGE AREA

Your Travel Scooter is equipped with a front storage
area that can be removed if additional leg or foot room
is needed. See figure 20. Remove the screws to
separate the small basket from the Travel Scooter.
NOTE: As a precaution, avoid placing wallets,
keys, or valuable items in the storage area.
Elite Traveller
C O M F O R T
www.pridemobility.com
A D J U S T M E N T S
UPPER SEAT POST
LOWER SEAT POST
DETENT PIN
Figure 19. Seat Height Adjustment
REMOVABLE
STORAGE
AREA
Figure 20. Front Storage Area
SCREWS
31