Sirius XM RAdio Universal Vehicle Kit User Manual page 41

Vehicle Installation
signal strength . The Satellite and Terrestrial
bars show the strength of the signal being
received . If the signal reception is good, exit
the Antenna Aiming or Signal Indicator screen
and continue with step 8 .
8. If you haven't done so, turn on your vehicle's
stereo system . Set it to play input from the
cassette source . You should hear the audio
through your vehicle's stereo system . The
cassette adapter installation is complete .
9. The audio level output of the Radio can be
increased or decreased as necessary to match
the audio levels of other sources in your
vehicle . Refer to your Radio's User Guide (go
to www .siriusxm .ca/help/user-guides) for
instructions .
10. If you are using the wire guide channel across
the back of the Vehicle Dock to organize the
wires, place the wires in the guide and then
tighten the 4 screws to securely attach the
mount . Then the installation is complete .
If the signal reception is good, showing at least two bars of antenna signal
strength, but there is no audio, be sure the vehicle's stereo system is set to the
cassette source (step 8) . Also be sure that the audio level is set high enough to
be heard (step 9) . Refer to "Troubleshooting" on page 46 for additional help .
1
866-635-2349
siriusxm.com
Signal Indicator
SATELLITE
TERRESTRIAL
Press menu to exit
*The screens shown above are
representative and may differ
from the screens displayed on
your Radio .
b
A
41