Sirius XM RAdio Universal Vehicle Kit User Manual page 17

Vehicle Installation
necessary for your particular vehicle . When the orientation is correct,
tighten the knob .
Knob
4. Attach the Adhesive Mount to the PowerConnect
Vehicle Dock using the 4 provided screws . If you
plan to use the wire guide channel across the
back of the Vehicle Dock to organize the wires,
do not fully tighten the screws . If not, tighten the
screws .
5. Once the cables have been attached to
the dock, clean the mounting surface in
the vehicle with the alcohol preparation
pad and let it dry thoroughly .
6. Peel off the adhesive liner . Position, press,
and hold the Adhesive Mount in place for
30 seconds .
IMPORTANT! Allow the Adhesive Mount
adhesive to cure (dry) for a minimum of 2-4
hours before using the mount . The best
adhesion occurs after 24 hours .
TIP! To remove the Adhesive Mount, carefully lift the adhesive pad with your
fingers or a spoon . Warming the pad with a hair dryer for several minutes will help
soften the adhesive .
Adhesive Foot
Dock Mounting Plate
17