Sirius XM RAdio Universal Vehicle Kit User Manual page 32

Vehicle Installation
Sedan/Coupe With the Antenna Placed at the Front of the Roof:
1. Feed the antenna cable from the antenna underneath the rubber molding
around the windshield . Use a blunt plastic putty knife or similar blunt tool
to lift the rubber molding around the windshield and tuck the antenna cable
underneath the molding . Route the antenna cable around and down the
windshield to the lowest point .
2. At the lowest corner of the windshield, route the cable out of the windshield
molding and into the rubber weather stripping around the door opening . Lift
the weather stripping from the opening and tuck the cable inside it, then
replace the weather stripping . Run
the cable inside of the weather
stripping to the bottom of the door
opening .
3. Pull the cable out of the weather
stripping at the bottom of the
door opening and route it under
the carpet toward the dashboard .
Coil any excess cable in a hidden
location, such as under the carpet,
keeping it away from any vehicle pedals or controls . Secure the excess cable
with wire ties .
4. Bring the end of the cable out at the PowerConnect Vehicle Dock location .
Leave yourself enough cable so you can easily connect it to the antenna
connector of the dock .
5. Continue with "Step 6: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter" on page 36 .
32