Aileron To Rudder Mixing 39 - JR XP652 Instruction Manual

7.6
AILERON TO RUDDER MIXING
On some types of aircraft, it is desirable to mix
aileron and rudder to make coordinated turns. The
XP652 allows the mixing of ailerons to rudder and
allows you to adjust the amount and direction of
until MIX A-R appears on the
Accessing the Aileron to Rudder Mixing Function
1. Turn on the transmitter.
2. Press the MODE and CHANNEL buttons
simultaneously to enter the function mode.
3. Press the MODE button until MIX A-R appears on
the screen.
4. Press the INCREASE or DECREASE button to set
XP652 MANUAL Airplane
Function Mode
•
A - R
MIX
+ 0
MIXING DIRECTION
ENTER
MODE CHANNEL
Press the MODE button
screen.
mixing. The aileron to rudder mixing can be left on all
the time, or it can be turned off with the selection of
one of three switches.
INDICATES THE AILERON TO
RUDDER MIXING FUNCTION
%
MIXING VALUE (0-125%)
Press the INCREASE and DECREASE
buttons simultaneously to set the
aileron to rudder mixing direction.
+
INCREASE
Press the INCREASE or DECREASE button
to set the aileron to rudder mixing value.
the desired amount and direction of aileron to
rudder mixing.
Note: If OF appears on the screen it is because the
aileron to rudder mixing switch is in the off
position.
–
CLEAR
DECREASE
39