14
5.4
TFSSO FRAME INSTALLATION
Hang the frame onto the fi rebox by en-
5.4.1
gaging the top trim bracket into the slot
in the top of the frame and the bottom
hooks of the frame into the slot in the
mounting cabinet.
TRIM
BRACKET
Install the trim bracket supplied in your
5.4.2
manual baggie to the fi rebox using 3
screws.
NOTE: If the frame needs to be secured, use
two screws in the holes provided behind the
control door.
Insert the door stop chain into the receiving slot
in the control door. Then insert the door chain
into the receiving slot in the frame so that when
fully opened the control door has a clearance of
1/8" to the mounting cabinet.
NOTE: In most cases a count of 15 balls on
the chain between receiving slots will be
suffi cient.
5.5
LOGO PLACEMENT
With the control door closed, affi x the logo to the front face of
the control door at the bottom left corner.
W415-0689 / A / 06.08.10
SLOT
FRAME
(REAR VIEW)
1/4"
(APPROX.)
LOGO
TRIM
BRACKET
DOOR
CHAIN
CONTROL
DOOR
1/4"
(APPROX.)