Installing Device - Dimplex FSR 15...35 Installation And Instruction Manual

5.2 Installing device

ATTENTION!
The equipment must be secured to ensure it doesn't tilt.
Once assembled, the upper edge of the storage heater
must be able to withstand a horizontal strain of at least
200N, without tilting or shifting. If the required stability
cannot be achieved with the supplied accessories, for
example, if the wall is not solid enough, the installer
must use a more suitable method of attaching the heater
to the wall.
Fig. 17: Floor mounting.
Affix the supplied wall brackets following the drilling template,
Fig. 11
Fig. 18: Mounting on wall
Affix the supplied wall brackets following the drilling template,
Fig. 11.
www.dimplex.de/en
ATTENTION!
For wall mounting without base support, carefully check
load-bearing capacity of wall (device is heavy!)
177
Fig. 19: Wall/floor mounting
If off-floor installation is required but the wall cannot support
the weight of the device, brackets WKO18 (accessory) must
be used. See drilling template Fig. 12
X+177
Fig. 20: Attach the stabiliser
459462.66.01 · 10/14/B
FSR 15-35 / FSR 15-35 GS / FSR 15-35 GW
EN-31