Related Manuals for Kogan KADHM16LXXA
Summary of Contents for Kogan KADHM16LXXA
- Page 2 Information on humidity..........................2 Product & Accessory Description......................2 Safety...................................3 Fundamental Safety Warnings......................3 Appropriate Use............................3 General Safeguards...........................3 Instructions..............................4 Electrical Connections..........................4 Installation.................................4 Draining into the tank..........................4 Continuous external draining........................4 Instructions for fitting castors......................5 How to Dehumidify............................6 Description of buttons..........................6 Display................................6 Mode selection..............................6 Dehumidifying mode..........................7 Dry mode..............................7 Smart mode..............................7 Fan mode..............................7...
- Page 3 Please read this manual carefully before use. Keep a copy handy for future reference. Air always contains a certain amount of water in the form of vapour. This determines the level of humidity in the atmosphere. The capacity of air to hold water vapour increases with temperature.
- Page 4 • It is dangerous to modify or alter the appliance in any way. • If the power cable is damaged, it must be replaced by a Kogan technician in • order to avoid electrical shock or fire risks. Do not use extension leads.
- Page 5 Failure to respect these instructions may result in injury or damage to the • appliance. Kogan.com is not liable for damaged derived from failing to following these instructions. After moving the appliance, wait at least an hour before turning it back on again.
- Page 6 4. Make sure the end of the hose is no higher than the spout, or water could remain in the tank. Make sure there are no kinks in the hose (Fig 6). NOTE: Keep the rubber bung close to the spout. 1.
- Page 7 The following are the meanings of the codes or symbols that may be displayed: Indicates that the appliance is in standby mode. Indicates that the tank is full, absent or positioned incorrectly. Indicates that the appliance is operating at low temperatures. In this situation, ventilation cycles are alternated with dehumidification cycles to avoid the formation of ice.
- Page 8 This dehumidifies automatically. According to the room conditions, the appliance will automatically establish the optimal settings for maximum comfort. Press the MODE button, then select Smart mode. The “ ” symbol will appear on the display. Relative humidity and fan speed cannot be set. Press the MODE button and select Fan mode.
- Page 9 Check the following points before contacting the Kogan customer support team. The filter is blocked. Clean the filter. The temperature or humidity in the In certain conditions, it is normal for room are already too low. the appliance to not dehumidify. In these cases, we recommend you heat the environment.