Advertisement
The following are the meanings of the codes or symbols that may be displayed:
Indicates that the appliance is in standby mode.
Indicates that the tank is full, absent or positioned incorrectly.
Indicates that the appliance is operating at low temperatures. In
this situation, ventilation cycles are alternated with
dehumidification cycles to avoid the formation of ice. For use in
particularly cold environments, you are recommended to heat the
room to raise the ambient temperature, even minimally. This
allows the dehumidifier to operate in conditions that improve its
performances and accelerate the dehumidifying process.
Indicates that there may be a fault with the probes, or that the
humidity in the room is too low to be measured.
1. Plug the appliance into the mains socket.
2.
will be displayed to indicate that the appliance is in standby mode and is
therefore ready for operation.
If
is displayed, empty the tank or position it correctly.
3. Press the ON/Standby button.
Press the MODE button and choose the dehumidifying mode.
" " and the level of relative humidity previously set are displayed.
Press the "+" or "-" button to set the desired humidity (30% means a dry environment,
80% means a humid environment).
Press the "
" button to modify the fan speed (MIN/MAX).
When MAX speed is selected, the appliance operates at maximum dehumidifying
power.
When MIN speed is selected, the appliance operates at low power and the operational
noise will also be less.
Press the " " button to display the room temperature (" " symbol) and the relative
humidity ("
") of the room in sequence.
When the appliance reaches the set level of humidity it will stop and the fan will come
on at regular intervals to maintain a correct relative humidity reading.
As soon as the humidity increases above the set point, the appliance will automatically
resume the dehumidification operation.
In dry mode, the appliance operates constantly at maximum power.
This mode is useful to dehumidify the room rapidly.
Press the MODE button, then choose Dry mode ("
Relative humidity and fan speed cannot be set.
" symbol on).
6
Advertisement
