Advertisement
Please read this manual carefully before use. Keep a copy handy for future reference.
Air always contains a certain amount of water in the form of vapour. This determines
the level of humidity in the atmosphere. The capacity of air to hold water vapour
increases with temperature.
Due to this, as the temperature in our home decreases, the vapour contained in the air
condenses and can be seen on cold surfaces in the room such as walls, windows,
mirrors etc.
The purpose of a dehumidifier is to remove the excess moisture from the air, which will
avoid the damage caused by condensation.
It has been determined that the optimum environmental conditions for our well being
and for the home is between 40% to 60% relative humidity. With very low
temperatures, you are recommended to heat rooms minimally.
With heating, the condensation formed by water vapour on walls and windows will be
collected by the dehumidifier. Air leaving the dehumidifier is normally about 1°C warmer
than room temperature.
1.
Control panel
4.
Lifting handle
7.
Air outlet grille
10. Drain hose connector*
2.
Water level viewing window
5.
Air intake grille
8.
Castors*
11.
Gasket joint*
2
3.
Condensate collection tank
6.
Air filter
9.
Drain hose*
*optional accessories
Advertisement
