Package Contents; Safety Warnings - Cisco AIR-LAP1310G Mounting Instructions

Package Contents

Each access point package contains these items:
•
•
•
•
•
•
•
•
The optional roof mount kit contains these items:
•
•
•
•
•
•
•
•
•
The optional wall mount kit (for indoor use) contains these items:
•
•

Safety Warnings

Translated versions of all the safety warnings are provided in the access point box and in Appendix A,
"Translated Safety Warnings" section of the Cisco Aironet 1300 Series Outdoor Access Point/Bridge
Hardware Installation Guide.
All Installations
Warning This warning symbol means danger. You are in a situation that could cause bodily injury. Before
you work on any equipment, be aware of the hazards involved with electrical circuitry and be
familiar with standard practices for preventing accidents. (To see translations of the warnings
that appear in this publication, refer to the appendix "Translated Safety Warnings.") Statement 84
78-17634-01
Access point unit (integrated antenna or external antenna configuration)
Power injector (LR2) unit
Power module and AC power cord
Quick Start Guide: Cisco Aironet Lightweight Access Points
Product mounting instructions (this document)
Translated safety warnings document
Read Me document
Cisco product registration and documentation feedback cards
One roof-wall mount
Two dual-coax cables [20 ft (6.1 m) and 50 ft (15.2 m)]
Multi-function mount (consisting of a access point bracket and a mast bracket)
Two tower clamps (U-bolts) with four nuts and washers
Four bolts and washers for securing the access point bracket to the mast bracket
Four bolts for securing the access point bracket to the unit
Grounding block and mounting screws
Ground lug for the access point, two hex nuts, and two washers
Weatherproofing kit (consisting of Coax Seal and electrical joint compound)
Wall mount bracket with 4 mounting bolts and washers
Two sub-mini RG-59 coax cables (12 in. or 30.5 cm)
Cisco Aironet 1300 Series Lightweight Outdoor Access Point Mounting Instructions
Package Contents
3