Cisco AIR-LAP1310G Mounting Instructions page 28

Mounting the Access Point
Attaching the Housing Bracket to the Access Point
To attach the housing bracket to the access point, follow these steps:
Step 1 Before attempting to attach the housing bracket, refer to
Figure 10
3
1
2
Attach the housing bracket to the housing using four hex bolts. Torque bolts to 8 to 10 ft-lb.
Step 2
Apply a thin layer of electrical joint compound to the access point at the ground lug location (See
Step 3
Figure
Cisco Aironet 1300 Series Lightweight Outdoor Access Point Mounting Instructions
28
Housing Bracket Attachment
2
2
1
2
2
Housing bracket
Hex bolt with serrated flange
11).
Figure 10.
3
3
Hang pin
4
78-17634-01