Network Connection & Ip Assignment - Vista VK2-1080XVRDPTZ User Manual

2.4 Network Connection & IP assignment
The camera supports the operation through the network. When a camera is first connected to the
network, it is necessary to allocate an IP address to the device with the "SmartManager" utility on
the CD. (Default IP 192.168.30.220)
1) Connect the network camera/device to the network and power up.
2) Start SmartManager utility (Start > All programs > SmartManager > SmartManager). The main
window will display, and after a short while any network devices connected to the network will
be displayed in the list.
3) Select the camera on the list and click right button of the mouse. You can see the pop-up
menu as below.
4) Select Assign IP Address. The Assign IP window will display. Enter the required IP address.
NOTE: More if multiple cameras are selected then a range of Ip addresses can be configured.
For more information, refer to the SmartManager User's Manual.
VK2-1080XVRDPTZ User Manual V1.0
13