Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Quick Manual
Advertisement
Table of Contents
Related Manuals for Vista VK2-1080BIR37e
Summary of Contents for Vista VK2-1080BIR37e
- Page 1 VK2-1080BIR37e Installation manual Please read this manual thoroughly before use, and keep it handy for future reference.
- Page 2 VK2-1080BIR37e User manual V1.0...
- Page 3 * WARNING: Improper use of this equipment can cause severe bodily injury or equipment damage. ** Caution: Improper use of this equipment can cause equipment damage. Note: Notes contain important information about a product or procedure. VK2-1080BIR37e User manual V1.0...
- Page 4 CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. VK2-1080BIR37e User manual V1.0...
-
Page 5: Important Safety Instructions
OPERATING INSTRUCTIONS UNLESS YOU QRE QUALIFIED TO DO SO. 16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed Class 2 power source only. ITE is to be connected only to PoE networks without routing to the outside plant. VK2-1080BIR37e User manual V1.0... -
Page 6: Table Of Contents
3.5.5 System ......................... 43 3.5.6 About ........................61 3.6 Playback ....................61 3.7 Help ......................63 3.8 Resetting to the factory default settings ..........64 4. Appendix ....................... 65 4.1 Troubleshooting ..................65 4.2 Preventive Maintenance .................66 4.3 Product Specification ................67 VK2-1080BIR37e User manual V1.0... -
Page 7: Description
1. Description This manual applies to the VK2-1080BIR37e full HD Bullet camera with IR illumination. • Installation Steps Follow these steps to install the VK2-1080BIR37e on your local network (LAN): 1. Check the package contents against the list below. 2. Connect the VK2-1080BIR37e 3. -
Page 8: Key Features
This is a global interface standard that makes it easier for end users, integrators, consultants, and manufacturers to take advantage of the possibilities offered by network video technology. ONVIF enables interoperability between different vendor products, increased flexibility, reduced cost, and future-proof systems. VK2-1080BIR37e User manual V1.0... -
Page 9: Layout
1.3 Layout • Connection Cable Name Description Power Cable Cable for Power source (DC 12V) Ethernet Cable Cable for Ethernet (POE) Camera Dimension See the diagrams below for the exact dimension Dimensions Unit: mm VK2-1080BIR37e User manual V1.0... -
Page 10: Installation
PC, while a direct cable is used for connection to a hub or switch. Micro SD memory slot Remove the front cap of the camera to insert the SD memory card. SD memory card slot Remove the front cap • Connecting the Power VK2-1080BIR37e User manual V1.0... -
Page 11: Network Connection And Ip Assignment
IP address to the device using the “Smart Manager” utility found on the supplied CD. (Default IP 192.168.30.220) Connect the VK2-1080BIR37e to the network and power up. Start SmartManager utility (Start>All programs>SmartManager>SmartManager), the main window will be displayed, after a short while any network devices connected to the network will be displayed in the list. -
Page 12: Operation
Enter the IP address or host name of the Network Camera in the Location/Address field of your browser. You can see a starting page. Click Live View or Setup to enter web page. The network camera’s Live View page appears in your browser. VK2-1080BIR37e User manual V1.0... -
Page 13: Access From The Internet
To set the password via an encrypted HTTPS connection, see “3.5.6 System >Security>HTTPS”. Note: HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt the traffic between web browsers and servers. The HTTPS certificate controls the encrypted exchange of information. VK2-1080BIR37e User manual V1.0... -
Page 14: Live View Page
The Full Screen button causes the video image to fill the entire screen area. No other windows will be visible. Press the 'Esc' button on the computer keyboard to cancel full screen view. The Manual Trigger button activates a pop-up window to manually start or stop the event. VK2-1080BIR37e User manual V1.0... - Page 15 The Live View page in network camera provides access to H.264, MPEG-4 and Motion JPEG video streams, and to the list of available video streams. Other applications and clients can also access these video streams/images directly, without going via the Live View page. VK2-1080BIR37e User manual V1.0...
-
Page 16: Camera Setup
Note: If the password is lost, the Network Camera must be reset to the factory default settings. See “3.8 Resetting to the Factory Default Settings”. 3.5.1 Basic Configuration You can see the device information in this information page. VK2-1080BIR37e User manual V1.0... - Page 17 An administrator has unrestricted access to the Setup tools and Administrator can determine the registration of all other users. Enable anonymous viewer login: Check the box to use the webcasting features. Refer to “3.5.2 Video & Image” for more details. VK2-1080BIR37e User manual V1.0...
- Page 18 The ARP/Ping service is automatically disabled two minutes after the unit is started, or as soon as an IP address is set. Pinging the unit is still possible when this service is disabled. VK2-1080BIR37e User manual V1.0...
- Page 19 Primarily for low-cost applications that requires additional error robustness, this profile is used rarely in videoconferencing and mobile applications, it does add additional error resilience tools to the Constrained Baseline Profile. The importance of this profile is fading after the Constrained Baseline Profile has been defined. VK2-1080BIR37e User manual V1.0...
- Page 20 Sometimes the image size is large due to low light or complex scenery. Adjusting the frame rate and quality helps to control the bandwidth and storage used by the Motion JPEG video stream in these situations. Limiting the frame rate and quality optimizes bandwidth and storage usage, but VK2-1080BIR37e User manual V1.0...
- Page 21 (see below). • New Server Time Select your time zone from the drop-down list. If you want the server clock to automatically adjust for daylight savings time, select the “Automatically adjustment for daylight saving time changes”. VK2-1080BIR37e User manual V1.0...
-
Page 22: Live View
Date Format: Specify the date format. YYYY: Year, MM: Month, DD: Day Time Format: Specify the date format. 24Hours or 12 Hours 3.5.2 Live View Source • Video Input Mode Video Mode: Choose Video Mode you wish to use from the drop-down list: NTSC or PAL VK2-1080BIR37e User manual V1.0... -
Page 23: Video & Image
3.5.3 Video & Image Basic Refer to “3.5.1 Basic Configuration > Video & Image” for more details. VK2-1080BIR37e User manual V1.0... - Page 24 Enable flip image: Check this box to flip the image. Enable mirror image: Check this box to mirror the image. Enable Noise Reduction: Check this box to reduce an image noise. VK2-1080BIR37e User manual V1.0...
- Page 25 60Hz: Select at 60 Hz environments. Enable Long Exposure: Set this checkbox to activate the electronic shutter of the camera. Max. Shutter: Select a shutter speed value in the drop-down list. The default setting is 1/15. VK2-1080BIR37e User manual V1.0...
- Page 26 4000K to 5000K. Fixed Outdoor: Fixed color adjustment for sunny, with a color temperature around 6500K to 7500K. Day & Night • Day & Night Control Select the day/night mode from among three modes. VK2-1080BIR37e User manual V1.0...
- Page 27 The privacy masks are configured by Mask windows. Each window can be selected by clicking with the mouse. It is also possible to resize, move or delete the window, by selecting the appropriate window at the mouse menu on the video screen. VK2-1080BIR37e User manual V1.0...
- Page 28 Note: To use webcasting service, the Enable Anonymous viewer login option must be checked. Refer to “3.5.1 Basic Configuration > Users” for more details. VK2-1080BIR37e User manual V1.0...
-
Page 29: Event
3.5.4 Event 1) Event-In On Boot This is used to trigger the event every time the Network Camera is started. Select “Enable” to activate the motion event. VK2-1080BIR37e User manual V1.0... - Page 30 This option makes use of the manual trigger button provided on the live view page, which are used to start or stop the event type manually. Alternatively the event can be triggered via the product's API (Application Programming Interface). VK2-1080BIR37e User manual V1.0...
- Page 31 Motion detection windows are configured by Motion or Mask windows. Each window can be selected by clicking with the mouse. It is also possible to resize, move or delete the window, by selecting the appropriate window with the mouse menu on the video screen. VK2-1080BIR37e User manual V1.0...
- Page 32 Dwell Time: Set the hold time an event lasts for the specified hold time from the point of detection of a motion. You can also modify or delete a motion index. Select an index and then, click the Modify or Delete button. Select “Enable” to activate the motion window. VK2-1080BIR37e User manual V1.0...
- Page 33 Network Loss This is used to trigger an event every time the network connection is lost. Select “Enable” to activate the Network Loss event. VK2-1080BIR37e User manual V1.0...
- Page 34 User Name/Password: Enter the User Name and Password as provided by your network administrator or ISP (Internet Service Provider). To ensure that the login procedure is performed as securely as possible when using SMTP authentication, you must define the weakest authentication method allowed. VK2-1080BIR37e User manual V1.0...
- Page 35 Remote directory: Specify the path to the directory where the uploaded images will be stored. If this directory does not already exist on the FTP server, there will be an error message when uploading. User name/Password: Provide your log-in information. VK2-1080BIR37e User manual V1.0...
- Page 36 URL: The network address to the server and the script that will handle the request. For example: http://192.168.12.244/cgi-bin/upload.cgi User name/Password: Provide your log-in information. • HTTP Server Test When the setup is complete, the connection can be tested by clicking the Test button. VK2-1080BIR37e User manual V1.0...
- Page 37 You can set the weekly recording schedule for each day. Drag or click area by a box unit at first. Clicking the block toggles the recording between on and off. Click the “All Select” button to set a schedule for the entire week or a whole day, respectively. VK2-1080BIR37e User manual V1.0...
- Page 38 * IP/Password: Enter ID and Password. The network camera will ask them whenever you access NAS device. * Check: Press the Check button to check the validity of Device Setting data. • Format Click the Format button to format SD card. • Device Information Show current SD card information. VK2-1080BIR37e User manual V1.0...
- Page 39 XML data format. Check the box to enable the service. • Event Notification Setting Notification Server URL: The network address to the server and the script that will handle the request. VK2-1080BIR37e User manual V1.0...
- Page 40 Framerate: Select a frame refresh rate per second for each condition in the drop-down list. Bitrate control: Select VBR or CBR in the drop-down list in Normal Condition. You can’t change it in Boost Condition. Bitrate: Select a value for each condition in the drop-down list. VK2-1080BIR37e User manual V1.0...
- Page 41 The event map allows you to change the settings and establish a schedule for each event trigger from the Network Camera. You can register the event map up to max. 15. Click Add button to make a new event map and you can see a popup window as below. VK2-1080BIR37e User manual V1.0...
- Page 42 Record: When the network camera detects an event, it can record video stream in the Micro SD Memory (not supplied) or NAS (Network Attached Device) as a storage device. Check the box to enable the Function. VK2-1080BIR37e User manual V1.0...
-
Page 43: System
You can enter the system information. This page is very useful when you refer device information after installation. • Device Name Configuration Enter the device name. • Location Configuration Enter the location information. You can enter that by four. VK2-1080BIR37e User manual V1.0... - Page 44 • User List Setting This section shows a registered user account. Enter a user name and password to be added, and register them by pressing the Add button. You can see the pop-up window as below. VK2-1080BIR37e User manual V1.0...
- Page 45 Browse button to locate it. Then click the Upload button. Please refer to the home page of your preferred CA for information on where to send the request. For more information, please see the online help. VK2-1080BIR37e User manual V1.0...
- Page 46 Note that users from IP addresses that will be allowed must also be registered with the appropriate access rights (Guest, Operator or Administrator). This is done from Setup> System>Security>Users. VK2-1080BIR37e User manual V1.0...
- Page 47 60 minutes. Set manually: this option allows you to manually set the time and date. Note: Note that if using a host name for the NTP server, a DNS server must be configured under TCP/IP settings. VK2-1080BIR37e User manual V1.0...
- Page 48 4) Network Setting in regard to network can be executed. Settings for IP, DNS, Host Name, Port, and ARP/Ping can be established, along with setting for DDNS, uPnP, QoS, Zeroconfig, Bonjour and wireless. VK2-1080BIR37e User manual V1.0...
- Page 49 Leave disabled to prevent unintentional resetting of the IP address. • Gateway Priority Wireless: In case of network connection through the wireless AP Wire: In case of a wired network connection. VK2-1080BIR37e User manual V1.0...
- Page 50 Users should receive an account and password by visiting a DDNS service like http://www.dyndns.com/, or http://www.cctv-network.co.kr/. Enable DDNS: Check to get DDNS service to be available. * Username: Enter an ID to access to the DDNS server. VK2-1080BIR37e User manual V1.0...
- Page 51 Start port: Enter a value between 30000 and 39920 End port: Enter a value between 30000 and 39920 • Multicast(Stream1/Stream2/Stream3) This function is for sending Video to Multicast group. Enable Multicast: Check the checkbox to enable multicast operation. VK2-1080BIR37e User manual V1.0...
- Page 52 Quality of Service (QoS) provides the means to guarantee a certain level of a specified resource to selected traffic on a network. Quality can be defined as a maintained level of bandwidth, low latency, and no packet losses. VK2-1080BIR37e User manual V1.0...
- Page 53 Mbit/s or kbit/s. Auto frame rate: Selected if not influenced by a network-related program or equipment without a limitation on the network bandwidth. VK2-1080BIR37e User manual V1.0...
- Page 54 For NAT traversal to work, this must be supported by the broadband router. The broadband router has many different names: “NAT router”, “Network router“, Internet Gateway”, “Broadband sharing device” or “Home firewall” but the essential purpose of the device is the same. VK2-1080BIR37e User manual V1.0...
- Page 55 Without zeroconf, a network administrator must set up services, such as Dynamic Host Configuration Protocol (DHCP) and Domain Name System (DNS), or configure each computer's network settings manually, which may be difficult and time-consuming. Zeroconf is built on three core technologies: VK2-1080BIR37e User manual V1.0...
- Page 56 Note: Bonjour - Also known as zero-configuration networking, Bonjour enables devices to automatically discover each other on a network, without having to enter IP addresses or configure DNS servers. Bonjour is a trademark of Apple Computer, Inc. VK2-1080BIR37e User manual V1.0...
- Page 57 5) Language It will be able to select a user language. The languages available are English, Russian and Korean. 6) Maintenance VK2-1080BIR37e User manual V1.0...
- Page 58 Note: Backup and Restore can only be used on the same unit running the same firmware. This feature is not intended for multi-configurations or for firmware upgrades. 7) Support The support page provides valuable information on troubleshooting and contact information, should you require technical assistance. VK2-1080BIR37e User manual V1.0...
- Page 59 - System Check: Click the System Check button to get the important information about the camera’s system resources. You can see the pop-up window below. - Media Check: Click the Media Check button to get the information about the camera’s video stream. You can see the pop-up window below. VK2-1080BIR37e User manual V1.0...
- Page 60 - Networks Check: Click the Network Check button to get the information about the camera’s network setting and traffic. You can see the pop-up window below. - Hardware Check: Click the Hardware Check button to diagnose the camera’s hardware like video. VK2-1080BIR37e User manual V1.0...
-
Page 61: About
To view a recording from the SD local storage, select it from the list and click the Playback buttons. Go to the first: go to the beginning of the video clip. Fast backward play: Backward play: play backward of the video clip. VK2-1080BIR37e User manual V1.0... - Page 62 If you click Start Date or End Date zone, displays Search Calendar. (7) Event List Window Event List displays the event(s) that were recorded in the SD local storage. Select a list and click the play button. The video clip will be played. VK2-1080BIR37e User manual V1.0...
-
Page 63: Help
The Help information window will be provided as a popup window so that users can open and read it without a need for log-in. It will offer a description on setting and Help page by which users can manipulate the Network Camera without a reference to the manual. VK2-1080BIR37e User manual V1.0... -
Page 64: Resetting To The Factory Default Settings
Keep the Reset button pressed for at least 2 or more seconds. Release the Reset button. The network camera resets to factory defaults and restarts after completing the factory reset. Caution: When performing a Factory Reset, you will lose any settings you have saved. (Default IP 192.168.30.220) VK2-1080BIR37e User manual V1.0... -
Page 65: Appendix
Modify the settings for your graphics adapter. Please see the H.264 and Motion JPEG. adapter's documentation for more information. Check that the SD Card is inserted properly. Video cannot be recorded. Check that the SD Card is formatted properly. VK2-1080BIR37e User manual V1.0... -
Page 66: Preventive Maintenance
Preventive maintenance allows detection and correction of minor that faults before they become serious and cause equipment failure. Every three-month, perform the following maintenance. Inspect all connection cables for deterioration or other damage. Clean components with a clean damp cloth. Verify that all the mounting hardware is secure. VK2-1080BIR37e User manual V1.0... -
Page 67: Product Specification
Operating Temperature -10°C ~ 45°C Operation Humidity 0~80% (non-condensing) DC 12V 500mA, 6.0W / PoE 125mA, 6.0W (with IR on) Power Consumption Power over Ethernet IEEE 802.3af Class0 Dimensions (WxHXD) 66dia x 173mm Unit Weight 445g VK2-1080BIR37e User manual V1.0... -
Page 68: System Requirement For Web Browser
-. Heavy network utilization due to poor infrastructure. Frame rate and Bandwidth affected. -. Heavy network utilization via wireless router due to poor infrastructure. Frame rate and bandwidth affected. -. Viewing on poorly performing client PCs lowers perceived performance. Frame rate affected. VK2-1080BIR37e User manual V1.0... - Page 69 Printed in Korea VK2-1080BIR37e User manual V1.0...