Introduction; Description - CEStronics RF-NET Repeater Fitting And Operating Instructions

Introduction

Introduction

Description

The Repeater part of the OMEGA system. It extends existing
radio links between installed Access Points and locking devices
by up to 25 metres.
For the operation of the Repeater no configuration is required;
all necessary settings are made by the Repeater itself.
To put the Repeater into service, you only have to select a
suitable place of installation and fasten the Repeater.
Once powered on, the Repeater will automatically establish the
connection with the Access Points.
Other features of the Repeaters:
 Integrated 868 MHz RF transceiver.
 Range increase of up to 25 metres.
 One Repeater can be used for each Access Point.
 The Repeater is supplied with electric power by the power
pack delivered together with the Repeater. The use of any
other power packs is not permitted.
 Two colour LEDs for visual signalization of data traffic.
The stated maximum range increase of 25 metres
cannot be guaranteed as it depends on the local
building conditions. CEStronics recommends to have
 
your building situation checked by your professional
CEStronics partner.
8 RF-NET Repeater