Fitting the Repeater
The Repeater must be fitted at an easily accessible
location, e.g. near a ceiling or on a wall.
Suitable fitting positions are for instance
above a door frame, at a height of about 2
metres with as much distance to the nearest
object or wall as possible, or
similar positions at a height of about 2 metres or
more and also with as much distance to the
nearest object or wall as possible.
The Repeater is to be installed with the ports pointing upwards.
This fitting position is the basis of the Declaration of
Conformity.
Other fitting positions are possible but the
operator's responsibility.
In case of lateral fitting, you, as the operator,
are responsible for the safe fitting.
NOTICE
Danger of injury by improper fitting.
Ensure safe fitting if the repeater is fitted
laterally.
16
RF-NET Repeater