CEStronics RF-NET Repeater Fitting And Operating Instructions page 13

Installation manual
Table of Contents

Advertisement

Checking the range
The optional RF-TRACE-MASTER allows you to check the quality
of the radio frequency (RF) link between the OMEGA server and
your locking devices.
The RF-TRACE-MASTER triggers the following signals of your
locking devices:
 Green LED of your locking cylinder, IES or wall terminal
flashes twice: very strong RF link.
 Green LED of your locking cylinder, IES or wall terminal
flashes once: adequate RF link.
 Red LED of your locking cylinder, IES or wall terminal
flashes: RF link is not OK and must be checked.
 Red and green LEDs flash alternately or simultaneously:
weak RF link.
To verify the quality of the RF link to your locking devices,
proceed as follows:
Hold the RF-TRACE-MASTER in front of your locking device.
The verification is performed immediately.
During the verification, the Access Point emits the
same signals as the locking device.
RF-NET Repeater
Introduction
13

Advertisement

Table of Contents
loading

Related Products for CEStronics RF-NET Repeater

Table of Contents