Intended Use; Versions; Manufacturer; Service - CEStronics RF-NET Repeater Fitting And Operating Instructions

For your safety

Intended use

The Repeater serves to extend the range of the data
transmission between locking devices and Access Points within
the CEStronics RF-NET radio network. Data are transmitted
between the Repeater and the locking devices and Access
Points via 868 MHz radio signals. The Repeater does not work
without an Access Point. The Repeater is exclusively intended
and may only be used for that purpose.
Any other use is considered to be improper and may result in
property damage or even personal injury.
CEStronics GmbH does not accept any liability for any damage
resulting from improper use.

Versions

These Fitting and Operating Instructions are only valid for:
 CEStronics RF-NET Repeater

Manufacturer

The manufacturer of the RF-NET Repeater is:
CEStronics GmbH
Friedrichstr. 243
42551 Velbert, Germany
Phone: +49 (0) 2051-204-0
Fax: +49 (0) 2051-204-105
www.ces.eu

Service

For service support please contact your professional CEStronics
partner.
RF-NET Repeater 7