CEStronics RF-NET Repeater Fitting And Operating Instructions page 5

 Do not drop the Repeater on the floor, on hard surfaces or
on hard objects.
 Use surge arresters to avoid damage to your Repeater
through overvoltage, for example by lightning.
 Protect the electronic components of the Repeater against
water and other liquids.
 The Repeater contains highly sensitive electronic parts that
may be damaged or destroyed through static charges. Do
not disassemble the Repeater in rooms with built up static
charge. Ensure potential equalization when working on the
Repeater to remove any static charge.
 Do not use the Repeater in corrosive atmospheres (chlorine,
ammonia, lime water).
 Only use the Repeater in rooms in which the humidity does
not exceed 95 %.
 Do not use the Repeater in rooms with a high level of dust
formation.
 Do not use the Repeater near sources of heat.
 Do not expose the Repeater to temperatures below 0 °C or
above +40 °C.
Danger of malfunctions
 Do not cover the housing of the Repeater with any metallic
material.
 Satisfy yourself when installing the Repeater that the
Repeater and all other system components are in perfect
working order. Malfunctions of the Repeater and other
system components may compromise the functioning of the
entire system.
 If necessary, use uninterrupted power supply (UPS) systems
to ensure an uninterrupted operation of your locking
system.
RF-NET Repeater
For your safety
5