Table of Contents
Advertisement
When fitting the Repeater, you must ensure the following
conditions:
Make sure that the power supply and the power supply cable
can be plugged in.
The Repeater must not be fitted on metallic surfaces.
Always install the Repeater as far away from ground
potentials as possible to avoid interference with the radio
traffic.
Do not fit the Repeater in the immediate vicinity to Access
Points or other Repeaters.
The Repeater may not be fitted outdoors.
The Repeater is supplied preassembled. To commission your
Repeater, you only have to fasten the wall mount at a suitable
position and push the Repeater on to the wall mount.
You require suitable fasteners for the wall mount of the
Repeater. Which fasteners and related tools you need, depends
on the surface at the place of installation.
Purchase suitable fasteners material from your specialized
fasteners dealer.
CAUTION
Danger of injury by improper fitting.
RF-NET Repeater
Ensure that the Repeater is only fitted by
appropriately trained skilled personnel.
Fitting the Repeater
15
Advertisement
Table of Contents
