vPower Management Events
Press <Enter> to set the items of power management events. Please
refer to page 43.
vPrimary IDE 0, Secondary IDE 0
When these items are enabled, the system will restart the power saving time-
out counters when any activity is detected on any of the drives or devices on
the primary or secondary IDE channels. The setting values are Disabled and
Enabled.
vFDD, COM, LPT Port
when this item is enabled, the system will restart the power saving time-out
counters when any activity is detected on the floppy disk drive, serial ports, or
the parallel port.
vPCI PIRQ[A-D]#
When this option is disabled, any PCI device set as the Master will not power
on the system.
42
Chapter 3
BIOS Description