Foxconn 915G Manual page 38

v
Typematic Rate
Use this item to define how many characters per second a held-down key
generated.
vTypematic Delay (Msec)
Use this item to define how many milliseconds must elapse before a held-
down key begins generating repeat characters.
vSecurity Option
When it is set to "Setup", a password is required to enter the CMOS Setup
screen; When it is set to "System", a password is required not only to enter
CMOS Setup, but also to startup your PC.
vAPIC Mode
This option is used to enable or disable APIC function. The available setting
values are: Disabled and Enabled.
vMPS Version Control For OS
This option is used to set up the version of MPS Table used in NT4.0 OS.
vOS Select For DRAM > 64MB
This item is only required if you have installed more than 64 MB of memory
and you are running the OS/2 operating system. Otherwise, leave this item at
the default.
vReport No FDD For WIN 95
If you are using the Windows 95 and running a system with no floppy drive,
select "Yes" for this item to ensure compatibility with Windows 95 logo
certification. The available setting values are: No and Yes.
vFull Screen LOGO Show
This item allows you to enable or disable full screen logo. The available
setting values are: Disabled and Enabled.
vSmall Logo (EPA) Show
This item allows you to enable or disable the EPA logo. The available setting
values are: Disabled and Enabled.
Chapter 3 BIOS Description
31