Foxconn 915G Manual page 14

CPU
This motherboard supports single processor in an LGA775 package. It also
supports Hyper-Threading technology and FSB Dynamic Bus Inversion (DBI).
For the detailed CPU vendor list qualified on this motherboard, please visit
the website: http://www.foxconnchannel.com
Installation of CPU
Below is the CPU socket illustration. Follow these procedures to install a CPU.
Load lever
1. Use thumb and forefinger to hold the hook of the load lever and pull the lever
down and away from socket to unlock it. Lift the load lever.
2. Push down the rear tab with your forefinger to bring the front end of the load
plate up slightly. Open the load plate with thumb. Be careful not to touch the
contacts.
Chapter 2 Installation Instructions
Load plate
Protective cover
7