Status Leds; Table 1-1 Port Status Leds; Figure 1-2 Port Leds - Edge-Core Gigabit Ethernet Switch Installation Manual

Status LEDs

The LEDs, which are located on the front panel for easy viewing, are shown below
and described in the following table.
10 M 100/1000 M
LED Condition
Ports 1~12
Link On Green
Off
Act Flashing Green
1000BASE-T Ports (Ports 9~12)
100/1000 M On Green
On Amber
Off
10 M On Amber
Off
Port Link
Link
Act
Link
Act

Figure 1-2 Port LEDs

Table 1-1 Port Status LEDs

Status
An SFP transceiver port has established a valid network
connection.
An SFP transceiver port has no valid link or there is no
transceiver installed in the slot.
Traffic is passing through the port.
Port has established a valid 1000 Mbps network
connection.
Port has established a valid 100 Mbps network
connection.
There is no valid link on the port.
Port has established a valid 10 Mbps network
connection.
There is no valid link on the port.
Description of Hardware
Port Activity
Power
RPU
Diag
!
Console
1
1-3