Certance LTO-2 Online User's Manual page 14

Installation (and Quick Start)
❑
7.
❑
8.
❑
9.
Desktop LTO-2 Half-Height Tape Drive Quick Start
Use the following procedure to install desktop LTO-2 half-height tape drive. Print this page and check
each step as you complete it. If you need more information about a step, turn to the section refer-
enced in the step.
❑
1.
❑
2.
❑
3.
❑
4.
❑
5.
❑
6.
❑
7.
Connect a power cable to the drive.
See "Connecting a Power Cable" on page 21.
Replace the computer covers and power cable, turn on the computer, and verify that the
internal tape drive is operating properly.
Register your tape drive.
See "Registering Your Tape Drive" on page 22.
Unpack the contents of your drive package, and check for damaged items.
See "Unpacking and Inspection" on page 15.
Review the drive's default settings and change them if necessary:
• SCSI ID: 6
See"Setting the SCSI ID" on page 22.
Connect a SCSI interface cable to the drive.
See "Connecting a SCSI Cable" on page 22.
Check the SCSI termination.
See "Checking the SCSI Termination" on page 23.
Connect a power cable to the drive.
See "Connecting a Power Cord" on page 23.
Turn on the computer, turn on the desktop tape drive, and verify that the desktop tape
drive is operating properly.
Register your tape drive.
See "Registering Your Tape Drive" on page 24.
Quick Start Guide
14