Firewall Commands - THOMSON SpeedTouch 585 Reference Manual

Firewall Commands

Introduction
This chapter describes the commands of the firewall command group.
Contents
This chapter covers the following commands:
firewall config
firewall clear
firewall list
firewall chain add
firewall chain delete
firewall chain flush
firewall chain list
firewall debug clear
firewall debug stats
firewall debug traceconfig
firewall level add
firewall level delete
firewall level flush
firewall level list
firewall level modify
firewall level set
firewall rule add
firewall rule delete
firewall rule flush
firewall rule list
firewall rule modify
firewall rule debug clear
firewall rule debug stats
firewall rule debug traceconfig
E-DOC-CTC-20050531-0058 v1.0
Configure the firewall options.
Flush the firewall configuration.
List the firewall configuration.
Add a chain.
Delete a chain.
Flush all chains.
List all chains.
Clear the firewall statistics.
Display the firewall statistics.
Configure the firewall trace options.
Add a security level.
Delete a security level.
Flush the security level configuration.
List all the security levels.
Configure a security level.
Set the security level or display the current security level.
Add a firewall rule.
Delete a firewall rule.
Flush all firewall rules.
Show a list of the firewall rules in a chain.
Modify a firewall rule.
Clear the firewall rule statistics.
Show the firewall rule statistics.
Display or modify the rule trace configuration.
Firewall Commands
314
316
317
318
319
320
321
322
323
324
325
327
328
329
331
333
334
336
337
338
340
341
343
344
313