Connecting the Printer
Connection to Power Supply
The printer is equipped with a wide range power unit (100-240V~), so it is
possible to use the printer both with a voltage of 230V~/50 Hz and with a
voltage of 115V~/60 Hz without making changes to the printer.
CAUTION !
Make sure the power switch (6) is in position "
connecting the printer to a power supply !
1
2
3
Insert the power cable (3) supplied in the accessories carton into the power
supply connector (7) and contact the cable to a grounded outlet.
Connection to a Computer
As standard, the printer is equipped with a bi-directional parallel interface ( 4)
and a serial RS-232-interface with a 9 pin connector ( 5).
For serial connection, make sure the serial interface RS-232 of the printer is
correctly configured to the settings of your computer (see Operator's Manual).
Connect the computer and the printer with a suitable cable ( 1,2) and secure the
cable connections with screws provided on the connectors.
CAUTION !
Make sure that all connected computers and their connecting cables are
correctly grounded.
O
Figure 1
" (OFF) before
4
5
6
7
1