Printer Configuration - Industrial Labeling Systems Ultimate 3000 Series Quick Operator's Manual

Printer Configuration

There are a variety of parameters that can be set to configure the printer to
specific requirements in the "Setup" menu of the Offline Menu.
The setup should be performed when operating the printer for the first time and
also when basic changes need to be carried out. In most cases however,
simple changes such as heat setting adjustments, using different media will be
made with software settings.
The "Setup" menu can be protected from unauthorized access by using a code
number (PIN).
1. Switch to the Offline Menu by pressing the
2. Continue to press the
menu. Press the
3. If the "Setup" menu is protected by a PIN the display will show "PIN: 0000".
You will need to enter the correct PIN before you can continue. The
numbers of the PIN can be changed by using the
The position to be changed will be flashing on the display. Press the
to move to the next number. If the correct number is entered, the "Setup"
menu is displayed.
4. The parameters are arranged in a tree like structure. Pressing the
as well as the
pressing the
5. If a parameter is selected, the display shows the actual value underneath
the parameter. On the top line the symbol
indicates that it is possible to switch between the parameter choices by
pressing the
6. T o change the current setting press the
Then the symbol
that it is possible to change the setting of the parameter by pressing the
key and the
7. Press the
key. In both cases the symbol
8. Press the
to "Online" mode.
8
key or the
key.
key will scroll between the secondary menus. By
key, the selected secondary menu will be chosen.
key and the key.
is shown in the lower line of the display and it indicates
key.
key to confirm the change. T o cancel the change press the
appears on the top line again.
key several times if necessary to return to the "Setup" menu or
key.
key until you reach the "Setup"
key and the
is shown. This symbol
key.
key.
key
key