Functions Of The Control Panel In The Offline Menu - Industrial Labeling Systems Ultimate 3000 Series Quick Operator's Manual

Functions of the Control Panel in the Offline Menu

The Offline Menu contains options to set machine and print parameters, to
enter test and service functions as well to operate with the memory card.
To enter this mode press the
Online
Menus and options marked with * can be protected by a PIN from unauthorized
access.
Menu [Memory Card] is only accessible, if a memory card is installed
Key Functions in the Offline Menu
Key
[Memory Card]
Test
Setup *
Service
Function
- Move up in the menu
- Increase numeric values
- Move down in the menu
- Decrease numeric values
- Switch to a secondary menu
- Move the cursor to the right during numeric settings
- Finish a setting with confirmation of the selected settings
- Start of a selected test or service function
- Return from a secondary menu
- Move the cursor to the left during numeric settings
- Finish a setting with rejecting the selected settings
- At the start of the menu, return to the system mode "Online"
key while in the ONLINE mode.
Label from card
Print directory
Copy memory card *
Format card *
ASCII dump (Card)
Short status
Status print
Font list
Device list
Printhead profile
ASCII dump mode
Test grid
Label profile
Local settings
Machine parameter
Print parameter
Interfaces
Security
Firmware update *
7