Eu Conformity Declaration; General Safety Instructions - Industrial Labeling Systems Ultimate 3000 Series Quick Operator's Manual

EU - Conformity Declaration
We declare herewith that as a result of the manner in which the machine designated below was designed,
the type of construction and the machines which, as a result have been brought on to the general market
comply with the relevant fundamental regulations of the EU Rules for Safety and Health. In the event of any
alteration which has not been approved by us being made to any machine as designated below, this
statement shall thereby be made invalid.
Description:
Transfer Printer
Applied EU Regulations and Norms:
- EC Machinery Regulations
- Machine Safety
- EC Low V oltage Regulations
- Data and Office Machine Safety
- EC Electromagnetic Compatibility Regulations
- Threshold values for the Interference
of Data Machines
- Limits for harmonic current emission
- Limits of voltage fluctuation and flicker
- Interference Resistance in both
Industrial and Small Plants

General Safety Instructions

1. The printer is built exclusively to print die-cut labels, continuous media, and similar
materials !
2. Connect the printer to an outlet with the correct volt age ! The printer is configured for
voltages of 100 to 240 V. Connect only to a power outlet with a grounded contact !
3. The printer must only be connected to devices which have extra low volt age !
4. Power must be OFF before plugging in any accessory, connecting to a computer and
before performing any maintenance on the printer. Also turn the power off on all
appliances before disconnecting from the printer !
5. Do not expose the printer to any moisture, or use in damp or wet areas !
6. The printer will operate with the cover open if necessary. If the printer must be operated
with the cover open, extra care must be taken to avoid allowing hair, jewelry , clothing,
etc. near the moving parts !
7. During the print process the printhead will become hot. Use extra caution when touching
the printhead. Do not touch the printing surface of the printhead with your hand !
8. Before starting any maintenance, power OFF the printer and disconnect the printer from
the outlet !
9. Any adjustments or repairs which are not described in this manual, should only be
carried out by an authorized service technician !
WARNING !
To avoid possible electric shock, do not open the backside cover !
Type :
A-series (A3)
98/37/EU
EN 292-2:1991
73/23/EEC
EN 60950:1992+A1:1993
EN 60950/A2:1993
89/336/EEC
EN 55022 :1998
EN 61000-3-2:1995+A1:1998+A2:1998
+A14:1999:2000
EN 61000-3-3:1995
EN 50082-1: 1992-12