Autolink.log File; Sample Net.cfg File - 3Com ETHERLINK III LAN PC CARD User Manual

AutoLink.Log File

The AutoLink.Log file contains a log of the events that
occurred during the AutoLink installation and configuration
process. To display the AutoLink.Log file, type the following:
C:\ Type AutoLink.Log | More

Sample NET.CFG File

This sample NET.CFG file supplies information about
parameters in the NET.CFG file and how they affect network
operations. For a full description and explanation of the
parameters, see the manual for the ODI shell for DOS, which
ships with the NetWare package or is available from Novell,
part # 100-000871-001.
Column spacing for the lines is critical for successful
operation. The section header line must start in column 0
with subsequent lines in that section being indented.
Comments are designated by semicolons (;). The NET.CFG file
is not caps-sensitive.
;
;**************************************************
NET.CFG File
LINK DRIVER 3C589
; PORT 300
; FRAME ETHERNET_802.2
FRAME ETHERNET_802.3
; PROTOCOL IPX e0 ETHERNET_802.2
; PROTOCOL IPX 0 ETHERNET_802.3 (binds IPX to
; frame)
; NODE ADDRESS 0020AFXXXXXX
; ======
; port [index] STARTING_PORT COUNT
; This setting is only required when there are
; 2 adapters in the workstation.
;
; All adapter-specific parameters are read
; from the adapter.
;
; mem [index] MEMORY_WINDOW (Optional)
; If parameter not present in NET.CFG,
; driver auto selects a free 4K memory window.
; Released after initialization of card.
; If specified, forces driver to use this
AutoLink.Log File B-5