3Com ETHERLINK III LAN PC CARD User Manual page 44

2 Change to the diskette drive and execute the NETSETUP.EXE
program.
3 Follow the screens to select a transport protocol.
4 Insert the appropriate diskettes for the selection you made
in step 3.
5 Select your network adapter. Type:
ETHERNET
6 Select OTHER NDIS.
7 When prompted for the DRIVE:\PATH\FILENAME for the
NDIS driver, type:
A:\MSLANMAN.DOS\DRIVERS\ETHERNET\ELPC3\ELPC3.DOS
8 When prompted for the full DRIVE:\PATH of the
PROTOCOL.INI fragment, type:
A:\MSLANMAN.DOS\DRIVERS\ETHERNET\ELPC3\PROTOCOL.INI
9 Follow the rest of the installation screens and the
procedure for writing the KEY DISK.
The NETSETUP program will build the PROTOCOL.INI file for
you and modify your startup files to use the adapter you have
selected.
You must add the /n parameter that starts the network
scheduler to the STARTNET.BAT file. For example, type:
%BOOT%\DECNET\sch /h /n
10 If you are not using Card Services and you are using a memory
manager, you must exclude the CIS memory address range for
the 3C589C PC Card and other Card Services devices.
For more information, see the section "Avoiding Memory
Manager Conflicts" in Appendix A.
This completes the procedure for installing the 3Com driver for
DEC PATHWORKS.
Installing the NDIS Driver 4-15