Installing The Netware Os/2 Odi Driver - 3Com ETHERLINK III LAN PC CARD User Manual

4 Select Driver Option.
The driver list is displayed.
5 Scroll through the list and select Others.
6 Remove the NetWare diskette from the floppy drive.
7 Insert the EtherDisk diskette in the floppy drive.
8 Press [Return].
The 3Com EtherLink III PC Card is displayed on the screen.
9 Press [Return] to accept the network board.
10 Press [F10] to install the driver.
11 Press [Return] and follow the NetWare instructions to
complete the installation.
12 Reboot the PC to load the new driver.
This completes the NetWare 4.X installation.

Installing the NetWare OS/2 ODI Driver

These instructions describe how to install the NetWare OS/2
ODI driver (3C589.SYS).
1 Select Novell NetWare OS/2 ODI Client on the main screen,
and click Manual.
2 Follow the displayed instructions to complete the
installation.
Installing the NetWare OS/2 ODI Driver 3-5