Dec Pathworks; Dec Pathworks For Dos/Windows Version 5.1 - 3Com ETHERLINK III LAN PC CARD User Manual

WIN.INI File (Windows)
[windows]
spooler=no
load=NWPOPUP.EXE C:\LANTASTI\WNET.EXE
run=C:\LANTASTI\MKWGROUP.EXE

DEC PATHWORKS

You can use the 3Com NDIS driver with both version 4.1 and
version 5.1 of DEC PATHWORKS. To install the 3Com NDIS driver
for DEC PATHWORKS, follow the appropriate instructions.
These instructions assume the DEC PATHWORKS for
DOS/Windows software has been installed on the hard drive.
Refer to the DEC manual for installation instructions if the
software has not been installed. Refer to the DEC manual for
templates and options.

DEC PATHWORKS for DOS/Windows Version 5.1

Run the AutoLink program on the EtherDisk diskette if you
are installing DEC PATHWORKS with Retail NetWare or
NetWare with ODI drivers. To install DEC PATHWORKS for
DOS/Windows 5.1:
1 Go to the drive where the PATHWORKS software is installed.
2 Change the directory to PCAPP.
3 Execute PWSETUP.
4 Enter the name of the directory where you want the
software installed.
The default is C:\PW.
5 Select CUSTOMIZE under the Select a Configuration Option
menu.
6 Select a template in the Select a Workstation Template menu.
7 Under the Customize: Modify Workstation Configuration
menu, put an X beside the Network Adapter Information line.
Additional menus will appear.
Installing the NDIS Driver 4-13