3Com ETHERLINK III LAN PC CARD User Manual page 38

For example, type:
A:\NDIS\OS2
14 Click OK.
15 Select EtherLink III PC Card for OS/2 and then click Add.
16 Under Current Configuration, select 3Com EtherLink III
PC Card for OS/2 and then click Edit.
17 Enter the 12-digit address of your EtherLink III LAN
PC Card and then click OK.
The address is found on the back of the PC Card following
the characters EA=.
18 Select the protocol(s) you will be using with your network
and then click Add.
19 Select your protocol(s) under Current Configuration and
then click Edit.
20 Enter the 12-digit address of your EtherLink III LAN
PC Card and then click OK.
21 Click OK.
22 Click Close.
23 Click Exit.
24 Select Update CONFIG.SYS and click Exit.
25 Click OK.
26 Click Exit.
27 Quit OS/2 and reboot for the changes to take effect.
28 Follow the IBM instructions on installing LAN Server to
complete the installation.
Installing the NDIS Driver 4-9