3Com ETHERLINK III LAN PC CARD User Manual page 34

6 Run the PCCONFIG.EXE program located in the \VINES
subdirectory.
7 Select option 1, Network Card Settings.
8 Select the NDIS Ethernet option.
The NDIS workstation screen appears.
9 Enter the IRQ that you selected for the 3C589C PC Card.
Select the IRQ using the configuration program.
10 Edit the CONFIG.SYS file and add the following lines,
substituting A: for C: for a floppy disk installation.
DEVICE = C:\VINES\PROTMAN.DOS /I:C:\VINES
DEVICE = C:\VINES\ELPC3.DOS
LASTDRIVE = M
11 Edit the AUTOEXEC.BAT file and add the following lines:
CD\VINES
BAN /NC
NDISBAN
NETBIND
REDIRALL
Z:
LOGIN
These additions allow you to log in after your PC starts up.
12 If you are not using Card Services and you are using a
memory manager, you must exclude the CIS memory
address range for the 3C589C PC Card and other Card
Services devices.
For more information, see the section "Avoiding Memory
Manager Conflicts" in Appendix A.
This completes the Banyan VINES installation procedure.
Installing the NDIS Driver 4-5