Table of Contents
Advertisement
FB200AS User Guide Version 1.0
(6) (6) Basically, the Hyper Terminal does not show the entered character. To make sure of the entered
character, select [File] [Properties] on the Menu, then registration information window will appear
shown as on <Figure 11-9>, click the ASCII Setup button.
(7) As shown on <Figure 11-10>, Check "Echo typed characters locally" and come out pressing the
acknowledge button. Now the Hyper Terminal program setting procedure is completed to use PC
Configuration.
(8) Press enter with small character "t" for FB200, the menu such as <Figure 11-11> will appear on the
Hyper Terminal.
Hyper Terminal Set Up Window 5
<Figure 11-10
<Figure 11-11 PC Configuration Menu>
How to complete PC Configuration?
11
>
Page 25 / 27
Advertisement
Table of Contents
