Table of Contents
Advertisement
FB200AS User Guide Version 1.0
(4) If the <Figure 11-2> comes up, set each blank (Red borders N.1~2) to (COM PORT –
connected to
the OPEN button (Red borders N.3), then
lights become green as shown on <Figure 11-3> .
If the lights doesn't change into green, check the COM PORT and execute BTConfig tool once again.
(5) If click the READ button (blue borders) as shown on <Figure 11-3> after BTConfig tool is connected
to products, MENU Buttons (<Figure 11-4> red borders N.1) are activated.
1 BLUETOOTH PARAMETERS:
2 Set-up window:
change Set-up Groups and values
1 READ button:
read set values. (During first initialization, value should be READ after BTConfig tools are
connected to products)
2 WRITE button:
Save set values. (Serial port is automatically off after saving is completely.)
3 INIT button:
Reset all the set values to Factory fix points.
(6) If you select any PARAMETERS(<Figure 11-4> red borders N.1), the window for Value Check and
Set-up comes up on the right
(7) Save the set values by clicking the WRITE button after Set-up completed.
FB200AS, BAUDRATE – 9600, PARITY BIT – None, STOP BIT – 1). After the set-up, click
Set-up Group Button
<Figure 11-4 BTConfig tool Set-up >
How to complete PC Configuration?
11
Serial Connection
and
Ready To Set
(Red borders N.1)
Page 21 / 27
Port
Advertisement
Table of Contents
