Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Firmtech Manuals
  4. Adapter
  5. FB100AS
  6. Quick manual

Firmtech FB100AS Quick Manual

Hide thumbs Also See for FB100AS:

Advertisement

Quick Links

Download this manual
FB100AS
Quick Guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the FB100AS and is the answer not in the manual?

Questions and answers

Related Manuals for Firmtech FB100AS

Summary of Contents for Firmtech FB100AS

  • Page 1 FB100AS Quick Guide...
  • Page 2 Features of FB100AS...
  • Page 3 * Before Getting Started…  Bluetooth is an international standard specification for near-distance /low-electricity/ high- reliability/low-price wireless communication  Bluetooth uses the internationally permitted 2.4GHz ISM band(Industrial,Scientific,Medical).  Bluetooth uses a 1Mbps ~ 3Mbps wireless transmission speed  Bluetooth consists of Master/Slave configuration as the relation between Master and Servant and one bluetooth device can be connected to Maximum 7 devices on the basis of ACL.
  • Page 4 * FB100AS Feature < FB100AS is> Bluetooth Specification 2.0 Support • UART communication speed control possible (2400bps ~ 230400bps)by using Dip Switch • Master/Slave setup possible by using Dip Switch • Supports AT command and AT command based control available •...
  • Page 5 In other words, the progressive method of this “FB100AS Quick Guide” guides the user in order from the start. Thus, if you read this guide for the first time, you need to proceed chapter by chapter in order to correctly understand its meaning.
  • Page 6 < Index > [0] Product Content & Installation [1] Hyper Terminal Setup [2] FB100AS Operation [3] Master & Slave Setup [4] Connect [5] Serial Data Transmission [6] Disconnect [7] Re-connect...

  • Page 7: Installation

    [0] Product Content & Installation...
  • Page 8 1. FB100AS Content (1) Product Content in One Set of FB100AS - FB100AS-Type (1 Set) < Product Content in One Set> FB100AS • Antenna (4 dBi Gain) • USB Power Cable •...
  • Page 9 (2) Configuration Using 2 Sets “FB100AS Quick Guide” uses two devices • for explanation purpose. 1 set for master setup 1 set for Slave setup...
  • Page 10 Checking Items Before FB100AS Operation (1) Dip Switch Setup Dip Switch Number#1 ON. Dip Switch Number#3,4 • • (Basic Setup Agenda)) ON. (Basic Setup Agenda) Dip Switch Number#2,3,4 UART communication speed • • OFF. setup to 9600bps. For even more details of Dip Switch, please refer to user...
  • Page 11 3. Product Installation (1) FB100AS + Antenna + USB Power Cable + PC Connect two FB100AS to a PC. • In this "FB100AS Quick Guide" two • FB100AS are connected to one PC for convenient explanation.
  • Page 12 [1] Setup of Hyper Terminal Checking received data & operation status by using hyper terminals.
  • Page 13 1. Serial Communication Program(Hyper Terminal) Execution & Setup (1) Operating A Hyper Terminal ⑸ ⑶ ⑷ Click “Start” on Windows Start menu. • Click “All Programs.” • • Click “Accessories.” ⑵ • Click “Communications.” ⑴ • Click “Hyper Terminal.”...
  • Page 14 Click “OK” and proceed to the next step. • ⑵ (3) Setup of hyper terminal - Port setting • Select a "port" to be connected to FB100AS set up to Master. (Assumed here as „COM1‟) Click “OK” and proceed to the next step. • ⑶...
  • Page 15 (4) Setup of Hyper Terminal – Communication Speed, etc. • Select “9600” for “Bits per Second(B)”. ⑸ • Select “None” for “Flow Control(F)” No change for other items. • Click “OK.” • ⑹ ⑺...
  • Page 16 Setup of Hyper Terminal connected to the FB100AS to be set as Master • is completed. • Do the setting of the hyper terminal connected to the FB100AS to be set to " a name of slave" in the same way and by connecting to “COM3.”...
  • Page 17 [2] Operating FB100AS...
  • Page 18 1. Operating the FB100AS (1) FB100AS Power-Supply ON • Press ON of Power-Switch...
  • Page 19 (2) Hyper Terminal Output Screen • Turn on the power switches of all two FB100AS. You can see “BTWIN Slave mode start” displayed • on the screen. Turn off the power switches of all devices. •...
  • Page 20 Status LED is displayed a green light if • Power LED is displayed a red light if • FB100AS is on Operation Mode(Operation). FB100AS power supply is ON. Status LED is displayed a red light if • FB100AS is on configuration Mode(Setup).
  • Page 21 * FB100AS Restart FB100AS should be restarted when FB100AS does • not operate normally nor any words is displayed on hyper terminal. • Restart the FB100AS by cycle-power(off and then on) of FB100AS power switch. Confirm communication-speed & other •...
  • Page 22 *POWER LED & Status LED Condition Operated Normally Status LED is blink a green. • Power LED is ON a red. •...
  • Page 23 * Factory Reset Progress – Environment Setup Entry by using Dip Switch Instructions Quick Guide is based on factory reset value. If it is already used or in customized setting, go to factory reset process as follows. Setup Dip Switch of FB100AS to be reset follows.
  • Page 24 * Factory Reset Progress – Environment Setup Menu Confirmation The followings are displayed on hyper terminal connected with FB100AS to be reset.
  • Page 25 * Power LED & Status LED Condition Entried into Environment Setup Mode Status LED is blink a red. • Power LED is ON a red. •...
  • Page 26 Progress the followings after an environment setup message output is made on the hyper terminal connected with FB100AS to be reset. Confirm "RESET" of a side "FB100AS". Press a Reset Switch in hole by using tweezers. • FB100AS was reset if environment setup •...

  • Page 27: Master & Slave Setup

    [3] Master & Slave Setup...
  • Page 28 Press ON of Dip Switch Number#1. • (Basic setup agendas). Press OFF of Dip Switch Number#2,3,4. • FB100AS electricity power ON. • In case of factory reset value, slave is basically setup(No need to be changed here).
  • Page 29 Slave setup is finished. • • In case of factory reset value, slave is basically setup(No need to be changed here). FB100AS Slave scans at the same time of • operating and can be connected with master. • Connected immediately if device of FB100AS located close is operated.
  • Page 30 * LED Condition Operated By Slave Status LED is blink a green. • Power LED is ON a red. •...
  • Page 31 2. Master Setup Progress By using Dip Switch (1) FB100AS master Setup Dip Switch setup to be master of FB100AS is setup as follows. Press ON of Dip Switch Number#1.(Basic setup • agendas). Press ON of Dip Switch Number#3. •...
  • Page 32 “BTWIN Slave mode start” output is made • from the FB100AS. • Master setup is finished. FB100AS Master is being connected at the • same time of operating. • Connected immediately if device of FB100AS located close is operated.
  • Page 33 * Status LED Condition Operated By Master Status LED is blink a green. • Power LED is ON a red. •...
  • Page 34 [4] Connect...
  • Page 35 1. Auto Connect (1) Master & Slave Auto Connect Enter the following on the hyper terminal connected to the FB100AS set up to master. “CONNECT 00189AF467DD” output is • made from the FB100AS. Bluetooth Address displays the connection • with “00189AF467DD”device.
  • Page 36 * Status LED Condition Connected Status LED is ON a green. • Power LED is ON a red. •...
  • Page 37 Should reset FB100AS if Master or Slave is connected with new device again. • Should be progressed again from the start after all FB100AS reset, if the connection of • FB100AS Master & Slave is not progressed for a certain time.
  • Page 38 * Environment Setup Entry by using Dip Switch Dip Switch to be reset of FB100AS is setup as follows. Press ON of Dip Switch Number#4. • Does not care for other Dip Switch Condition. • FB100AS electricity power ON. •...
  • Page 39 * Environment Setup Menu Confirmation The left message is displayed on • hyper terminal connected with FB100AS to be reset.
  • Page 40 * LED Condition Entried by Environment Setup Status LED is blink a red. • Power LED is ON a red. •...
  • Page 41 Progress the followings after an environment setup message output is made on the hyper terminal connected with FB100AS to be reset. Confirm "RESET" of a side "FB100AS". Press a Reset Switch in hole by using tweezers. • FB100AS was reset if environment setup •...

  • Page 42: Serial Data Transmission

    [5] Serial Data Transmission...
  • Page 43 1. Serial Data Transmission (2) Serial Data Transmission From Master=> Received By slave Enter the followings on the hyper terminal connected to FB100AS setup to be master. After entering "123456789" on the hyper- • terminal, press enter-key. Entered data is not shown on the hyper-terminal.
  • Page 44 (2) Serial Data Transmission From slave=> Received By master Enter the followings on the hyper terminal connected to FB100AS setup to be slave. After entering "123456789" on the hyper- • terminal, press enter-key. Entered data is not shown on the hyper-terminal.
  • Page 45 [6] Disconnect...
  • Page 46 (1) Disconnect Method FB100AS Master & Slave are disconnected automatically after a • certain time if one side of FB100AS electricity power is OFF.
  • Page 47 [7] Re-connect...
  • Page 48 (1) Reconnect Method Reconnected automatically again if electricity power of FB100AS device • is ON ,in case of previously connected FB100AS Master & Slave.
  • Page 49 For even more details, please refer to FB100AS user mannual.