Table of Contents
Advertisement
FB200AS User Guide Version 1.0
(5) Status Display of Procedures(<Figure 10-3>N. 1 red borders) turns red into green after Set-up is
completed. Click the OK button if the blank of SLAVE Device Value is filled. (<Figure 10-3>N. 2 red
borders)
(6) Connect FB200AS(2) to the USB port, and turn the power on.
(7) Click the FIRMTECH MASTER Set-up (<Figure 10-4> Blue borders) Button
1 COM PORT
: Select the Serial port of PC which is connected to a product
2 DEBUG CHAR
: Default is 0x02. (Refer to the appendix A about PC Configuration)
10
<Figure 10-4 Connection Wizard Step 4>
<Figure 10-5 Connection Wizard Step 5>
Connecting the wireless section of Bluetooth
Page 17 / 27
Advertisement
Table of Contents
