Webasto Air Top 2000 ST B Installation Instructions Manual page 26

Air Top 2000 ST
11.4. Control element connection
The wiring harness is prepared for connection to the control element.
Simply pull on connector housing to unplug the connector.
The connector housing can be locked (self-locking action) by simply
pulling on the wiring harness.
NOTE:
The fibre optic cable must be in contact with the rotary knob
NOTE:
As an option an external temperature sensor may be installed in the
passenger cabin (see page 49).
Fig. 26: Control element
Fig. 27: Installation of the control element
Fig. 28: Installation of the control element (incorrect)
Electrical connections
61