Webasto Air Top 2000 ST B Installation Instructions Manual page 14

Air Top 2000 ST
IMPORTANT
If you use the heater without a hot air inlet hose, the inlet grille supplied
with the heater must be used at all times.
NOTE:
The installation must be checked for:
– Air short circuit between the vehicle's heating system and the heater
air inlet
– Air short circuit between the heater's air inlet and the heater's air
outlet (Figure 7)
Fig. 8: Hot air inlet with inlet grille
If you use an installation box the air vent must be sealed in such a way
that no hot air can get into the installation box.
6.1. External temperature sensor
The installation of an external temperature sensor is recommended if
the heater is operated in fresh air mode.
6.1.1. To install the external temperature sensor
The external temperature sensor must be installed at medium height in
the passenger cabin on vertical surfaces if possible in the area that
requires heating.
The temperature sensor must not
– be in the direct current of hot air (from the vehicle's own heating
system or the hot air heater).
– by close to heat sources (for example the vehicle's own heating
system).
– be placed in direct sunlight (for example on the dashboard).
– be installed behind curtains or the like.
Hot air system
49