BMW 318i Owner's Handbook Manual page 133

Take care when installing the covers, as
otherwise leaks could occur and cause
damage to the headlight
Access to the bulbs, version 1
The high beam headlight can be accessed from
the engine compartment, whereas the low-
beam headlight is accessed through a flap in
the wheel well.
1 Cover for high-beam headlight
2 Cover for low-beam headlight
3 Turn indicator holder
To remove the covers:
1. Fold the respective wire bracket to the side,
see arrows.
2. Flip the cover upwards and take it out of the
guide.
Follow the same steps in reverse order to refit
the covers.
Access to the bulbs, version 2
The high beam headlight can be accessed from
the engine compartment, whereas the low-
beam headlight is accessed through a flap in
the wheel well.
Online Edition for Part no. 01 41 0 013 257 - © 02/07 BMW AG
system.<
1 Cover for high-beam headlight
2
Cover for low-beam headlight
3 Turn indicator holder
To remove the covers:
> High-beam headlight: press the catch,
arrow 4, and take the cover out of the guide.
> Low-beam headlight: unscrew and remove
the cover, arrow 5.
Follow the same steps in reverse order to refit
the covers.
Access through the wheel well
Only for low-beam headlights and turn indica-
tors:
1. Turn the wheel inwards.
2. Open the flap in the wheel well. To do so,
use a coin, for example, to turn the fastener
anti-clockwise.
Replacing the low-beam headlight and
high-beam headlight, version 1
1. Remove the relevant cover for the head-
light.
2. Disconnect the plug from the light.
131