Power On Gprs - Unitech PA970 User Manual

Power on GPRS

Note: Power off the terminal before installing the SIM card.
Install the SIM card before you power on the GPRS.
After removing the battery cover and battery pack you will find the SIM card slot located
inside the terminal beside the built-in Wireless.
Select DialUpGPRS from the GPRS folder of Program files.
Select GPRS @ 115200 and tap OK.
When connected, tap Hide.
Note: It might take up to several minutes to get a GPRS connection depending on the local GPRS
system.
The APN Default is "Internet".
If your network provider does not use "Internet"
as APN, please select the APN setting from the
GPRS program files on the Startup bar to set
APN.
32
PA970 User's Manual