Video Setup - Daewoo SD-8100P Owner's Manual

DV6T711P-AP(DESUK)2 02.7.22 3:45 PM

VIDEO Setup

A user can set up a connected TV condition and screen.
60
Downloaded From Disc-Player.com Daewoo Manuals
˘ ` 60 mac001 300DPI 120LPI
I Before setting it, you should change status into DVD by pressing [DVD] button on the
remote control.
1
While DISC STOP or Resume STOP, press [SETUP/ENTER] button.
2
Selecting TV Aspect.
If a user selects "4:3 PS", the user can watch only a
centre of the original scene of "16:9".
If a user selects "4:3 LB", the user can watch the
original scene of "16:9", but the top and bottom of the
screen will look black.
If a disc size is originally recorded in 4:3, a user cannot
watch it in a wide screen though a user sets a size as
"16:9 Wide".
3
Selecting a TV type.
A user may select a TV type.
A user may select a type between NTSC and PAL .
4
Selecting a VIDEO OUTPUT.
A user may select a VIDEO OUTPUT between
RGB and S-Video.
5
Selecting a bright degree.
A user may select a bright degree of a screen.
There are two choices of Normal and Bright.
6
Selecting a vivid degree.
A user may select a vivid degree of a screen.
There are three of choices, Normal, Soft and
Sharp.
Language
Video Audio Others
4:3 PS
TV Aspect 4:3 PS
TV Type PAL 4:3 LB
Video Out S-Video 16:9 Wide
Brightness Normal
Sharpness Normal
Move: Select : Exit:Setup/Return
Language
Video Audio Others
TV Aspect 4:3 PS
TV Type PAL NTSC
Video Out S-Video PAL
Brightness Normal
Sharpness Normal
Move: Select : Exit:Setup/Return
Language
Video Audio Others
TV Aspect 4:3 PS
TV Type PAL
Video Out S-Video RGB
Brightness Normal S-Video
Sharpness Normal
Move: Select : Exit:Setup/Return
Language
Video Audio Others
TV Aspect 4:3 PS
TV Type PAL
Video Out S-Video
Brightness Normal Normal
Sharpness Normal Bright
Move: Select : Exit:Setup/Return
Language
Video Audio Others
TV Aspect 4:3 PS
TV Type PAL
Video Out S-Video
Brightness Normal
Normal
Sharpness Normal Soft
Sharp
Move: Select : Exit:Setup/Return