Auto Clock - Daewoo SD-8100P Owner's Manual

DV6T711P-AP(DESUK)1 02.7.24 11:16 AM

Auto Clock

24
Downloaded From Disc-Player.com Daewoo Manuals
˘ ` 24 mac001 300DPI 120LPI
5
Should you wish the stations to have the same
numbers as those used on the TV, follow the
instructions in "Sorting programme locations" on
page 35.
Else ...
exit the basic installation function and enjoy your
player.
CHECK UP!
• If you don´t see this picture, because you don´t use a SCART cable, search this
picture now (CH 52) with the station tuning functions of your TV set (see its user
manual).
• In case of interference problems on CH 52, type in an
other transmission channel between 21 and 69 using
the number buttons.
I Auto Clock is only available for models with the PDC function (see page 36).
Some broadcasting stations may send the time and date along with the PDC data. The
video will automatically use this time and date during the initial setting up procedure
during normal use, and every time you switch the video off at the mains. If you find that
this time and date is incorrect you can remove this feature by following the steps below
changing it to OFF mode, you will then have to manually set the time and date, see
page 25.
1
Call the player's "MAIN SETUP",
choose "VCR SETUP".
And press the [OK] button.
2
Select "AUTO CLOCK ON/OFF".
If you want AUTO CLOCK OFF mode, select it and
press [OK] button to confirm.
MANUAL SET
PR01 BBC1 PR08 SKYS
PR02 BBC2 PR09 MTVE
PR03 ITV PR10 P-10
PR04 CHA4 PR11 P-11
PR05 SKY1 PR12 ----
PR06 SKYN PR13 ----
PR07 SKYM PR14 ----
PR+/-:SELECT
OK:CONFIRM SETUP:END
VCR SETUP
CLOCK SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
AUTO CLOCK
PR+/-:SELECT
OK:CONFIRM SETUP:END
AUTO CLOCK
ON
OFF
PR+/-:SELECT
OK:CONFIRM SETUP:END