Reset To Default Factory Settings - Technicolor TWG870 Operating Instructions Manual

Version 1.5
2. Default factory settings
2.1 LAN
Network
Default gateway
DHCP address range
2.2 WLAN
You can find the name of the wireless network (SSID) and the password for the PSK encryption
(WPA2–PSK) on the label at the bottom of the device. These values differ from modem to modem
and can be adjusted individually (see Chapter 4.3).
For example:
2.3 Firewall
Activated:
WAN blocking
-
IPsec/PPTP pass-through
-
Multicast
-
SIP ALG
-
Deactivated:
- UPnP
- Remote management
For further information on the firewall settings, please refer to Chapter 4.
2.4

Reset to default factory settings

You can reset the modem to the default factory settings at any time. The easiest way to do this is
via the reset button at the back of the device. Press and hold the reset button for 15 seconds.
Alternatively, you can use the web interface. You can find the option to reset the device to the
default factory settings under "Password" in the "Status" menu.
05/03/12
192.168.0.0/24
192.168.0.1
192.168.0.10 to 192.168.0.254
Page