Troubleshooting - Porter-Cable PCC583B Instruction Manual

18v cordless / 12vdc inflator
Table of Contents

Advertisement

Available languages

Available languages

90577349 PCC583B Inflator.qxd:??????-00 BDL500 laser
MAINTENANCE
Clean only with a dry cloth. Never let any liquid get inside the tool; never immerse any
part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (other than those listed in this manual) should be performed by authorized
service centers or other qualified service personnel, always using identical replacement parts.
Problem
• Unit will not start.
• Will not inflate.
For assistance with your product, visit our website at www.portercable.com for a list of service
centers, or call the Porter-Cable Customer Care Center at (888) 848-5175.
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our service website at
www.portercable.com. You can also order parts from your nearest PORTER-CABLE Factory Service
Center or PORTER-CABLE Authorized Warranty Service Center. Or, you can call our Customer
Care Center at (888) 848-5175.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For information about
PORTER-CABLE, its factory service centers or authorized warranty service centers, visit our website
at www.portercable.com or call our Customer Care Center at (888) 848-5175. All repairs made by our
service centers are fully guaranteed against defective material and workmanship. We cannot
guarantee repairs made or attempted by others.
You can also write to us for information at PORTER-CABLE, 4825 Highway 45 North, Jackson,
Tennessee 38305, (888) 848-5175 - Attention: Product Service. Be sure to include all of the
information shown on the nameplate of your tool (model number, type, serial number, etc.).
ACCESSORIES
WARNING:
Since accessories, other than those offered by PORTER-CABLE,
have not been tested with this product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only PORTER-CABLE recommended accessories
should be used with this product.
A complete line of accessories is available from your PORTER-CABLE Factory Service
Center or a PORTER-CABLE Authorized Warranty Service Center. Please visit our Web
Site www.portercable.com for a catalog or for the name of your nearest supplier.
THREE YEAR LIMITED WARRANTY
PORTER-CABLE will repair or replace, without charge, any defects due to faulty
materials or workmanship for three years from the date of purchase for tools (two years
for batteries). This warranty does not cover part failure due to normal wear or tool
abuse. For further detail of warranty coverage and warranty repair information, visit
www.portercable.com or call (888) 848-5175. This warranty does not apply to
accessories or damage caused where repairs have been made or attempted by others.

TROUBLESHOOTING

Possible Cause
12 Volt adapter
not connected.
Accessory socket
not live.
Main ON/OFF switch not in
correct position.
The fuse in the 12 Volt adapter
is blown.
Cord or switch is damaged.
Incorrect mode selected.
Battery depleted.
13
7/22/11
3:07 PM
Page 13
Possible Solution
Connect the 12 Volt
adapter.
Turn key to accessory
position.
Turn main switch to
required position.
Replace the fuse with
one of the same size
and type (8A/250V).
Have cord or switch
replaced at a Porter-Cable
Service Center or
Authorized Servicer.
Select correct mode.
Recharge battery and
retry.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents